SA633 Grade E Steel

SA633 Grade E Steel

SA633 Grade E. The SA633 Grade E specification is the Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates when superior notch toughness is needed at low temperatures. Grades C is available up to 4" in thickness and Grade E is available up to 6" in thickness.

ASME SA633/SA633M Grade A Steel Coil

C max Si Mn P max S max Cu max
0.18 0.15–0.50 1.00–1.35 0.035 0.04 0.05
Thickness(mm) Yield strength (≥Mpa) Tensile strength (≥Mpa) Elongation in ≥%
T≤65 290 430-570 200mm 50mm
65 290 430-570
100 - - 18 23
ASME SA633/SA633M Grade C Steel Coil
C max Si Mn P max S max Cu max
0.20 0.15–0.50 1.15–1.50 0.035 0.04 0.01-0.05
Yield Strength (MPa) min. Tensile Strength (MPa) Elongation in 8 in. min. % Elongation in 2 in. min. %
345 485 - 620 18 23
ASME SA633/SA633M Grade D Steel Coil
C max Si Mn P max S max Cu
0.20 0.15–0.50 0.70–1.35 0.035 0.04 -
Yield Strength (MPa) min. Tensile Strength (MPa) Elongation in 8 in. min. % Elongation in 2 in. min. %
345 485 - 620 18 23
ASME SA633/SA633M Grade E Steel Coil
C max Si Mn P max S max V Ni max
0.22 0.15–0.50 1.15–1.50 0.035 0.04 0.04-0.11 0.03
Yield Strength (MPa) min. Tensile Strength (MPa) Elongation in 8 in. min. % Elongation in 2 in. min. %
345 485 to 620 18 23
Quick quote

We receive enquiries in English, Español (Spanish) and Русский язык (Russian). Our professional team will reply to you within 24H. Please feel free to contact us!

Top